Shenzhen Tunsing Plastic Products Co., Ltd.
Shenzhen Tunsing Plastic Products Co., Ltd.
Add to Cart
Description:
This product DS617L-3 is a thermoplastic adhesive, It can be heated repeatedly and bonded. It performs an excellent adhesion for textile and non polar PP. This adhesive exhibit excellent heat resistance, cold resistance and water resistance. ( Strong initial viscosity, film curing time is long )
Composition:
Polypropylene
Applications:
DS617L development direction and application are aimed at the bonding of textile and PP.
Physical Characteristics:
Color | Milky white translucent | Release Liner | Glassine release paper |
Density | 0.98±0.02g/cm³ | Conventional Thickness | 0.05mm ,0.08mm |
Melt Flow Index | 10±4g/10min; Condition:ASTMD1238-04 | Conventional Width | 1000mm |
Melting Point | 70℃ | Length | 100 yards |
Operating Temperature | 90°C -130°C | Finished Products specification | 1000mm*100yards/roll |
Recommended Bonding Conditions:
Flat Press | Second Flat Press |
Machine Setting: 90℃-130℃ | Machine Setting: 90℃-130℃ |
Dwell Time: 15-35 seconds | Dwell Time: 15-40seconds |
Pressure: 0.3-0.6mpa | Pressure: 0.3-0.6mpa |
Application
Test Equipment
In order to strengthen the management of quality , we purchase many kinds of test equipments.
for example : Melt Flow Index Machine Differential Scanning Calorimetry Peel Force Tester High Low Temperature Tester Chamber Bend Distortion Tester Thrust Tester
Certifications
Our company has passed ISO9001:2015 quality management system certification, and all products in our company are up to RoHS,REACH, Oeko-tex, California Proposition 65, Halogen Test Report, PFOA, PFOS, PAHS, HBCDD and other environmental standards.
FAQ :
1 .How about hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point, it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your demands ,then recommend you right products to you.
2.Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer material manufacturer ,having more than 10years experience. able to assist you R&D new products. So if you need bonding some special materials, please don’t hesitate to let us know.
3.How do you transport the products?
If you are not urgent, we usually transport by ship because it is the cheapest way. But for the West Asia area,
we deliver by train because there is no sea to ship. And for samples and urgent cargo, we transport it by air as it is the fastest way .Of course if you have other better idea about transport, we will accept it.
4. May I have your samples?
If you need some sample for reference, please let us know your fully address/ship
mode with courier ,and we will arrange sample for your reference.
5. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)
6. How do I pay for my order?
We accept L/C ,T/T ,Western Union , Paypal , Escrow
Contact Us: